
The main advantage of ordering from a factory over buying in a showroom isn't the price but the ability to adapt the piece to you. In a showroom you take what's on display. At a factory the display is an example, not the range.
We've put together a checklist of what's worth asking. We've seen everything listed with our own eyes at the Foshan factories.
Sizes
Almost everything can be changed: seat height, depth, length. A modular sofa can be built up to 8–12 metres — U-shaped, L-shaped, left or right, for a specific layout.
This isn't a whim. At one factory we saw a new model where the manufacturer raised the seat from 35 centimetres to 45 and reduced the depth: for a European build it ended up uncomfortable, and the model sells poorly. Exactly the same logic works the other way round — the piece is adjusted to your height at the drawing stage.
A small thing people don't think about: dining tables 2 and 4 metres long get three legs, while a 1.8-metre table gets two. It's a question of stability, not design, and it should be discussed before production.
Color and material

The display color is the factory's choice for photos, not the only option. A dark green front can be made in grey, veneer can be tinted any shade, and upholstery is chosen from the collection.
Check separately what the inner surfaces are made of. With a good manufacturer the piece is made entirely of one material, including the insides of drawers and the underside of tabletops. That's exactly where corners are cut most often.
Hardware and padding: ask for part numbers

Factories that work on projects have a display board with their components laid out. You can see everything there: German hinges, locks, imported zippers, American threads, Italian water-resistant paints.
A separate word on padding. A serious manufacturer states the part number and density in kilograms outright rather than writing "high-resilience filling". Three-layer padding — softer on top, denser below — holds its shape for years; single-layer padding sags within a season.
Ask for all of this to go into the specification. Verbal promises don't survive on the factory floor.
The specification: in what language and what goes in it
A proper specification is made in Russian, in English if needed, and contains:
- exact dimensions of every item;
- material densities and padding part numbers;
- drawings that you sign;
- color and finish type for every element.
Production starts only after you sign. Anything not in the specification the factory will make at its own discretion — and it will be within its rights.
What to ask for in the details

- Cushion locking. At good factories the cushion sits anywhere on the backrest and holds under full weight. On cheap replicas it slides off at the first movement.
- Casters inside the legs. The armchair moves with one hand, and they can't be seen from outside.
- Electroplating instead of spray coating. Rose gold and brass should be a bath-applied coating, not a thin layer that wears off on the corners.
- Seat heating on outdoor furniture. Can be installed on every module, with a joystick, about $200 per piece.
- Covers. Ordered from the same factory, they extend the life of an outdoor set by years.
A photo report before packing

This isn't an option but a mandatory stage. Before the piece goes into a box it is photographed: color, size, measurements with a ruler. The balance payment is made only after you confirm the report. If a manufacturer or middleman isn't prepared to do this, the question is closed — no other arguments needed.
One money tip
When all items are placed with one manufacturer, the order becomes large and the factory meets you on price. You can spread an order across ten factories — we do it all the time — but where possible, buying from one manufacturer is more cost-effective.
What's pointless to ask for
Faster timelines. The full cycle — selection, production and sea freight — takes 5–6 months, and it won't be faster. The only thing that really saves time is coming to China yourself: in Foshan the specification is closed in 5–7 days instead of about two months of remote work.
Send us a list of models or your design project — we'll put together a specification with all these points and calculate the cost including production and turnkey delivery. An estimate of 15 items is free.





















